[pptp-server] Help Compiling with RC4
Marcus Lee
marclee at mgmt.utoronto.ca
Sun Jul 25 23:17:29 CDT 1999
On Sun, 25 Jul 1999, Brian west wrote:
> ... Well I got it to compile but I get this when trying to connect:
> Jul 25 12:45:00 www modprobe: can't locate module ppp-compress-21
> Jul 25 12:45:00 www modprobe: can't locate module ppp-compress-21
> :
> :
> Jul 25 12:45:00 www pppd[7342]: MPPE 40 bit, stateless compression enabled
> Jul 25 12:45:01 www pppd[7342]: Unsupported protocol (0x1bfc) received
> Jul 25 12:45:01 www snmpd: Connection from 127.0.0.1
> Jul 25 12:45:04 www pppd[7342]: Unsupported protocol (0xd1c8) received
> Jul 25 12:45:07 www pppd[7342]: Unsupported protocol (0xf142) received
> ... whats the unsupported protocol stuff??? hmmm
Hi Brian,
I looked through my logs, and it seems that only after I unchecked (in
the network protocols dialog box under dial-up networking)...
1. IPX/SPX compatible protocol support
2. NetBEUI protocol support
...did the error message stop. I know that pppd supports IPX, but I
haven't gotten around to configuring it. ;-)
Try connecting with only TCP/IP checked in the network protocols dialog
box and see if you still get this error.
Also, from the HOWTO-PoPToP-pre3 document, you can get rid of the "can't
locate module ppp-compress-21" error if you manually load "bsd_comp" and
"ppp_deflate". i.e.
insmod bsd_comp
insmod ppp_deflate
... I'm sure there is a way to automate this, but I'm not terribly
familiar with the kernel module stuff.
marc
--
Marcus Lee
marclee at mgmt.utoronto.ca
Rotman School of Management, University of Toronto
[check http://mgmt.utoronto.ca/~marclee/ for my PGP Public Key]
More information about the pptp-server
mailing list