[pptp-server] PPP 2.3.10

[Tony Skinner]

I believe kinstall.sh does everything your mentioning if I am not mistaken.
I would have to look at the file first though. I followed the instructions
given when i installed ppp-2.3.10 onto a 2.2.13 kernel setup. I ran into no
problems whatsoever.

Tony


At 09:33 AM 11/4/99 +1000, you wrote:
>I'll merge these changes into the current HOWTO
>
>-matt
>
>On Thu, 04 Nov 1999, Toktar, Emir wrote:
>>When I installed the PoPToP, I follow the procedures HowTo/Faq and had any
>>problems. 
>> 
>>I modifyed any procedures below and work fine.
>> 
>>Procedures that I used for comments.
>>(+) lines that I add ....
>>(-) lines that I cut ....  # not necessary
>># comment
>>******************************
>>PoPToP HOWTO/FAQ
>>----------------
>>Last Updated: 19990813
>>Maintained by: Matthew Ramsay <matthewr at moreton.com.au>
>>HOWTO/FAQ mostly compiled from PoPToP help pages and the PoPToP Mailing List
>>(hosted by Christopher Schulte) by Matthew Ramsay. Large contributions from
>>Steve Rhodes and Michael Walter.
>>+++++++++++++++++++++
>>3.0 PPP (and MSCHAP/MPPE) Installation
>>--------------------------------------
>>It is only necessary to use PPP 2.3.8 if you want Microsoft compatible
>>MSCHAPv2/MPPE authentication and encryption. The reason for this is that
>>the MSCHAPv2/MPPE patch currently supplied (19990813) is against PPP 2.3.8.
>>If you don't need Microsoft compatible authentication/encryption any 2.3.x
>>PPP source will be fine.
>>Assuming you want Microsoft compatible authentication/encryption follow
>>these steps:
>>Note: [] are example commands to run
>>1. Grab yourself a clean copy of the PPP deamon v2.3.8 (ppp-2.3.8.tar.gz).
>>    I usually go here for my PPP files:
>>ftp://cs.anu.edu.au/pub/software/ppp/
>>    Note: You must get the tarball (tar.gz) and *not* the RPM.
>>2. Grab youself the MSCHAP/MPPE diff file from:
>> 
>>http://www.moretonbay.com/vpn/releases/ppp-2.3.8-mppe-others-norc4_TH7.diff.
>>gz
>>3. Grab yourself the SSLeay-0.6.6b file from:
>>    ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL/SSLeay-0.6.6b.tar.gz
>>4. You should now have 3 files:
>>    ppp-2.3.8.tar.gz
>>    ppp-2.3.8-mppe-others-norc4_TH7.diff.gz
>>    SSLeay-0.6.6b.tar.gz
>>    (+) ppp-2.3.8-patch1 ==>correction for IPX/SPX
>>Copy these files to your preferred location (I prefer /usr/local/src/)
>>    #e.g.  I uninstall previus ppp
>>    (+) rpm -e ppp-2.3.7-2
>>5. Assuming your files are in /usr/local/src/ and your current working
>>directory is also /usr/local/src/ do the following:
>>    [tar zxvf ppp-2.3.8.tar.gz]
>>    [gunzip ppp-2.3.8-mppe-others-norc4_TH7.diff.gz]
>>    # e.g..  it's not gunzip... [gunzip
>>ppp-2.3.8-mppe-others-norc4_TH7.diff.gz]
>>    [tar zxvf SSLeay-0.6.6b.tar.gz]
>>    [cp SSLeay-0.6.6b/crypto/rc4/rc4.h ppp-2.3.8/linux/]
>>    [cp SSLeay-0.6.6b/crypto/rc4/rc4_enc.c ppp-2.3.8/linux/]
>>    (+) [cp SSLeay-0.6.6b/crypto/rc4/rc4.h /usr/src/linux/drivers/net/]
>>    (+) [cp SSLeay-0.6.6b/crypto/rc4/rc4_enc.c /usr/src/linux/drivers/net/]
>>    (+) [cp ppp-2.3.8-patch1 ppp-2.3.8/pppd]
>>    (+) [cd ppp-2.3.8/pppd]
>>    (+) [patch -p0 < ppp-2.3.8-patch1]
>>    (+) [cd /usr/local/src/]
>>    [patch -p0 < ppp-2.3.8-mppe-others-norc4_TH7.diff]
>>    [cd ppp-2.3.8]
>>
>>6. The files should now all be in place and we are ready to compile PPP.
>>Follow these steps to compile it:
>>    [./configure]
>>    (+) [make kernel] --> reference ppp-2.3.8
>>    #e.g.  It isen't necessary following lines below described in
>>HOWTOFAQ...
>>    (-) [cd linux]               # not necessary
>>    (-) [./kinstall.sh]         # not necessary
>>    (-) [cd ..]                   # not necessary
>> 
>>
>>##
>>## Read documentation in ppp-2.3.8 ###
>>## README.linux
>>##-----(if kernel < 2.2.8)---------###
>># e.g. Build the kernel when < Kernel 2.2.8
>># kernel 
>>    [cd /usr/src/linux/]
>>    [make menuconfig .....if necessary ...]
>>    [make dep]
>>    [make clean]
>>    [make bzImage]
>>    [make modules]
>>    [make modules_install]
>>###-----(endif  kernel < 2.2.8)---------###
>>    [pwd]
>>    [usr/local/src/ppp-2.3.8]  # be sure into ppp-2.3.8 dir
>>    [make]
>>    [cp pppd/pppd /usr/sbin/]
>>    (+) [make install] --> reference ppp-2.3.8
>>    [cd /usr/src/linux]
>>    [make modules SUBDIRS=drivers/net]
>>    [make modules_install]
>>    [rmmod ppp]
>>    (+) [insmod slhc]
>>    (+) [insmod ppp]
>>    (+) [insmod bsd_comp]
>>    (+) [insmod ppp_deflate]
>>    (+) [insmod ppp_mppe]
>>
>>
>
>_______________________________________________
>pptp-server maillist  -  pptp-server at lists.schulte.org
>http://lists.schulte.org/mailman/listinfo/pptp-server
>List services provided by www.schulte.org!
>