[pptp-server] Newbie question
Toktar, Emir
EMIR.TOKTAR at bra.xerox.com
Tue Nov 23 20:00:20 CST 1999
You´re right, but to avoid any mistake I wrote exactally which paches there
were and when applyed them as it is descripted below:
" There are patch to ppp-2.3.8 and ppp-2.3.9, ppp-2.3.10 not yet " ,
so , I hope it is understood and there is no doubt left. Thanks for you
comprehension and your help!
Regards.
Emir Toktar
+55 (**41) 340-7157
emir.toktar at bra.xerox.com
toktar at per.com.br
toktar at ppgia.pucpr.br
-----Original Message-----
From: Pascal Fremaux [mailto:pf at sxb.bsf.alcatel.fr]
Sent: Tuesday, November 23, 1999 6:41 AM
Cc: Pptp-Server
Subject: Re: [pptp-server] Newbie question
But the problem is not that.
I answered to Tony Galan, and what he asked, it was for the 2.3.10 ppp.
And you know, if you took a look to the source, that the modificationis of
ppp-2.3.8-patch1 and ppp-2.3.9-patch1 (which are different) are included in
ppp-2.3.10.
And a patch for ppp-2.3.10 exist, on
http://www.moretonbay.com/vpn/download_pptp.html
<http://www.moretonbay.com/vpn/download_pptp.html> .
That'all folks !
"Toktar, Emir" wrote:
"Pascal Fremaux" wrote:
> Go and see yourself: no ppp-2.3.10-patch1 in this place. the only patch1
> is for 2.3.9, and not necessary for 2.3.10.
---------------------------------------
>> Everything went smoothly except for "patch -p0 < ppp-2.3.10-patch1"
--------------------------------------
Be careful !! There are patches for 2.3.8 and 2.3.9 are different.
The respectives patches fixed different line codes.
Look for the patch for ppp-2.3.X and apply to fix it. Ok!
ppp-2.3.8-patch1 ==> fix IPX support in the Kernel
ppp-2.3.9-patch1 ==> fix the include "sysmacros.h"
Open the sources codes "sys-linux.c" in ppp-2.3.9 and ppp-2.3.8,
after this, look for the same lines codes:
### if (path_to_procfs("/net/ipx_interface") ###
You will find a bit of difference that the ppp-2.3.8-patch1 fix it!
You should apply ppp-2.3.8-patch1 (using ppp-2.3.8 of course!)and you
repeat the same steps above, you won´t find any difference. OK!
Please, look for the softwares on:
ftp://cs.anu.edu.au/pub/software/ppp/
<ftp://cs.anu.edu.au/pub/software/ppp/>
README
old/
ppp-2.3.10-1.i386.rpm
ppp-2.3.10-1.ppc.rpm
ppp-2.3.10-1.src.rpm
ppp-2.3.10.tar.gz
ppp-2.3.8-1.i386.rpm
ppp-2.3.8-1.ppc.rpm
ppp-2.3.8-1.src.rpm
ppp-2.3.8-patch1
ppp-2.3.8.tar.gz
ppp-2.3.9-1.i386.rpm
ppp-2.3.9-1.ppc.rpm
ppp-2.3.9-1.src.rpm
ppp-2.3.9-patch1
ppp-2.3.9.tar.gz
There are patch to ppp-2.3.8 and ppp-2.3.9, ppp-2.3.10 not yet :)
Regards
Emir Toktar
--
Pascal Fremaux, SSII Alten
Study Engineer at Alcatel Telecom
R&D, Illkirch, France
_______________________________________________ pptp-server maillist -
pptp-server at lists.schulte.org
http://lists.schulte.org/mailman/listinfo/pptp-server List services provided
by www.schulte.org!
More information about the pptp-server
mailing list