[pptp-server] Connection but no connection
Nick Jones
nickj at Power-Networking.net
Wed Nov 24 00:13:50 CST 1999
Hey everyone. I finally got the PPTPd server to allow clients to connect w/ 2.3.10 pppd w/ the mppe patch (40/128bit) and a 2.3.28 kernel. Everything seems to work as far as connecting the two machines together with the VPN link, but neither side of the tunnel can ping the "remote ip address" on the other side. I included all of the settings in my configuration files below. I hope someone can help me get this working.
options file:
debug
auth
+chap
+chapms
+chapms-v2
mppe-40
mppe-128
mppe-stateless
pptpd.conf
debug
localip 192.168.0.100-110
remoteip 192.168.1.100-110
Default routing table before vpn link
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
206.58.2.194 0.0.0.0 255.255.255.255 UH 40 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 40 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 40 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 3584 0 0 lo
0.0.0.0 206.58.2.194 0.0.0.0 UG 40 0 0 ppp0
Both 192.168.0.180 and 192.168.1.180 are bound to the eth0 device
-Nick Jones
nickj at Power-Networking.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.schulte.org/mailman/private/pptp-server/attachments/19991124/800fe86f/attachment.html>
More information about the pptp-server
mailing list