[pptp-server] Need Help-Domain Auth. via PoPToP

Cowles, Steve Steve.Cowles at gte.net
Fri Mar 10 13:18:33 CST 2000


Your propably going to have to post the output of "netstat -rn" from both
the linux box (poptop server) and the remote client. Also "ifconfig" output
might help also.

BTW: Is your linux box acting as a firewall? If so, have you enabled
(ACCEPT) proto 47 and port 1723?? This bit me the first time I setup Poptop.

Steve Cowles

-----Original Message-----
From: Mike Stanton [mailto:mstanton at lumend.com]
Sent: Friday, March 10, 2000 1:05 PM
To: 'Cowles, Steve'; 'pptp-server at lists.schulte.org'
Subject: RE: [pptp-server] Need Help-Domain Auth. via PoPToP


1.) No
2.) No
3.) Yes
4.) I do have a similar message in my log file, however, it is referring to
the eth1, my internal network interface.
5.) Error 6118: The computer(s) sharing resources in this workgroup cannot
be located. The computer(s) might have been restarted. Wait a few minutes...

-----Original Message-----
From: Cowles, Steve [mailto:Steve.Cowles at gte.net]
Sent: Friday, March 10, 2000 10:56 AM
To: 'pptp-server at lists.schulte.org'
Subject: RE: [pptp-server] Need Help-Domain Auth. via PoPToP




-----Original Message-----
From: Mike Stanton [mailto:mstanton at lumend.com]
Sent: Friday, March 10, 2000 12:14 PM
To: 'pptp-server at lists.schulte.org'
Subject: [pptp-server] Need Help-Domain Auth. via PoPToP


Hello everyone,

I'm running PoPToP 1.0.0 on Linux Mandrake 7.0. w/ Samba 2.0.6. My Win98
client (w/ updated 128-bit patch) can establish a 128-bit connection without
incident, but cannot authenticate to the Win NT Domain.  I keep receiving an
error message saying that no NT domain is available. I've tried specifying
in the lmhosts file the domain and PDC and I've also tried specifying the
WINS and DNS servers in the TCP settings of the VPN connectoid.

Can anyone tell me what I'm doing wrong?  I'm so close, yet so far...

Thanks,

Mike

_______________________________________________
pptp-server maillist  -  pptp-server at lists.schulte.org
http://lists.schulte.org/mailman/listinfo/pptp-server
List services provided by www.schulte.org!

1) Can you ping the PDC server after you create the VPN?
2) Can you ping the WINS server after you create the VPN?
3) Does "winipcfg" show the proper settings? e.g. WINS server.
4) Do you see the following (similer) line in your log files when
establishing a connection?
Mar 10 11:43:06 voyager pppd[725]: found interface eth0 for proxy arp

If your unable to ping the PDC or WINS server (from the remote) then this is
a network routing problem which is usually caused by the linux pppd server
not acting as a proxy arp for your connection.

5) What error do you see when typing: net view /domain:<MS Domain Name> fro
the remote.

Steve Cowles

_______________________________________________
pptp-server maillist  -  pptp-server at lists.schulte.org
http://lists.schulte.org/mailman/listinfo/pptp-server
List services provided by www.schulte.org!




More information about the pptp-server mailing list