[pptp-server] Can't get MPPE to work!
Emir Toktar
toktar at per.com.br
Tue Mar 28 21:56:33 CST 2000
Ieha, this is not exclusive your problem. Since that I did my update to RH
6.1, ppp-2.3.10-3 and openssl-0.9.4 I have the same problem. I tryied
reinstall DUN NT4.0 (before and after of the SP6.0) and I didn't success.
Thanks for any TIPs.
I saw this message too...
=========cut message================
----- Original Message -----
From: Michael Armstrong <mikea at maketi.com>
To: <pptp-server at lists.schulte.org>
Sent: Thursday, 16 March, 2000 12:24 AM
Subject: [pptp-server] NT compression revisited
|
| When the client is Windoze NT.
| Running the client with No encryption gives perfect
| connection/authentication and data transmission
| Running the client with Encryption allows the
| connection/authentication, but any attempt to access the internal
| network gives a slew of "unsupported protocol" messages.
|
| The Windoze NT configuration which doesn't work is:
| NT 4.0 workstation, SP6a, 128 bit edition
==================================
Emir Toktar
+55 2141 232-4570
toktar at per.com.br
emir.toktar at bra.xerox.com
toktar at ppgia.pucpr.br
----- Original Message -----
From: Eric H. Raskin <eraskin at paslists.com>
To: <pptp-server at lists.schulte.org>
Sent: Monday, 27 March, 2000 12:49 PM
Subject: [pptp-server] Can't get MPPE to work!
| Help!!
|
| I'm doing something stupid, but I can't find it. Setup is Linux 2.2.14
with
| MPPE patches/pppd 2.3.10 with patches applied. Win98 client with DUN40
(128
| bit) installed. I can connect fine without data encryption enabled.
|
| I thought I followed all the setup instructions, but I can't get Data
Encryption
| to work. I've been through the FAQ's, but I can't find anything to help
me out.
| I keep getting:
|
| Error 742: The computer you're dialing in to does not support the data
| encryption requirements specified.
|
| Here's my pptpd.conf file:
|
| speed 115200
| option /etc/ppp/pptpd.options
| debug
| localip 192.168.10.1 (the IP Address on my LAN of my Linux
| Firewall)
| remoteip 192.168.1.2-254
|
|
| Here's my /etc/ppp/pptpd.options file:
|
| debug
| name xxxx
| idle 1800
| auth
| require-chap
| +chap
| +chapms
| +chapms-v2
| mppe-40
| mppe-128
| mppe-stateless
| ms-wins 192.168.10.2
| ms-wins 192.168.10.2
| ms-dns 192.168.10.2
| ms-dns 192.168.10.1
| proxyarp
|
| Here's the result of lsmod:
|
| Module Size Used by
| ppp_mppe 12432 0 (unused)
| ppp_deflate 40036 0 (unused)
| ip_masq_raudio 2800 0 (unused)
| ip_masq_ftp 2192 0 (unused)
| ppp 21548 4 (autoclean) [ppp_mppe ppp_deflate]
| slip 8116 2 (autoclean)
| slhc 4320 3 (autoclean) [ppp slip]
| 3c59x 18760 1 (autoclean)
|
| (BTW, I had to insmod ppp_deflate and ppp_mppe. How do I get them to
| auto-load?)
|
| Here's my /var/log/messages file:
|
| Mar 27 10:32:11 pluto pptpd[9338]: MGR: Launching /usr/local/sbin/pptpctrl
to
| handle client
| Mar 27 10:32:11 pluto pptpd[9338]: MGR: Launching /usr/local/sbin/pptpctrl
to
| handle client
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: local address = 192.168.10.1
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: local address = 192.168.10.1
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: remote address = 192.168.1.3
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: remote address = 192.168.1.3
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: pppd speed = 115200
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: pppd speed = 115200
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: pppd options file =
| /etc/ppp/options.pptp
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: pppd options file =
| /etc/ppp/options.pptp
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Client 168.100.202.52 control
| connection started
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Client 168.100.202.52 control
| connection started
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Received PPTP Control Message
(type: 1)
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Received PPTP Control Message
(type: 1)
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Made a START CTRL CONN RPLY
packet
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Made a START CTRL CONN RPLY
packet
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: I wrote 156 bytes to the client.
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: I wrote 156 bytes to the client.
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Sent packet to client
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Sent packet to client
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Received PPTP Control Message
(type: 7)
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Received PPTP Control Message
(type: 7)
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Set parameters to 0 maxbps, 16
window
| size
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Set parameters to 0 maxbps, 16
window
| size
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Made a OUT CALL RPLY packet
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Made a OUT CALL RPLY packet
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Starting call (launching pppd,
opening
| GRE)
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Starting call (launching pppd,
opening
| GRE)
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: pty_fd = 5
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: pty_fd = 5
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: tty_fd = 6
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: tty_fd = 6
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): Connection speed
=
| /etc/ppp/options.pptp
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): Connection speed
=
| /etc/ppp/options.pptp
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): local address =
| 192.168.10.1
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): local address =
| 192.168.10.1
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): remote address =
| 192.168.1.3
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): remote address =
| 192.168.1.3
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[0] =
| /usr/sbin/pppd
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[0] =
| /usr/sbin/pppd
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[1] =
local
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[1] =
local
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[2] =
115200
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[2] =
115200
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[3] =
| 192.168.10.1:192.168.1.3
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[3] =
| 192.168.10.1:192.168.1.3
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[4] =
file
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[4] =
file
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[5] =
| /etc/ppp/options.pptp
| Mar 27 10:32:11 pluto pptpd[9339]: CTRL (PPPD Launcher): pppd argv[5] =
| /etc/ppp/options.pptp
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: I wrote 32 bytes to the client.
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: I wrote 32 bytes to the client.
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Sent packet to client
| Mar 27 10:32:11 pluto pptpd[9338]: CTRL: Sent packet to client
| Mar 27 10:32:11 pluto modprobe: modprobe: Can't locate module
char-major-108
| Mar 27 10:32:11 pluto modprobe: modprobe: Can't locate module
char-major-108
| Mar 27 10:32:11 pluto pppd[9339]: pppd 2.3.10 started by root, uid 0
| Mar 27 10:32:11 pluto pppd[9339]: Using interface ppp2
| Mar 27 10:32:11 pluto pppd[9339]: Connect: ppp2 <--> /dev/pts/5
| Mar 27 10:32:11 pluto pppd[9339]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<auth
| chap 81> <magic 0xb4e27c0a> <pcomp>
| Mar 27 10:32:11 pluto pppd[9339]: Timeout 0x805074c:0x8078560 in 3
seconds.
| Mar 27 10:32:11 pluto pppd[9339]: rcvd [LCP ConfReq id=0x1 <magic
0x37739c>
| <pcomp> <accomp>]
| Mar 27 10:32:11 pluto pppd[9339]: lcp_reqci: returning CONFACK.
| Mar 27 10:32:11 pluto pppd[9339]: sent [LCP ConfAck id=0x1 <magic
0x37739c>
| <pcomp> <accomp>]
| Mar 27 10:32:11 pluto pppd[9339]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>
<auth
| chap 81> <magic 0xb4e27c0a> <pcomp>
| Mar 27 10:32:11 pluto pppd[9339]: Untimeout 0x805074c:0x8078560.
| Mar 27 10:32:11 pluto pppd[9339]: sent [LCP EchoReq id=0x0
magic=0xb4e27c0a]
| Mar 27 10:32:11 pluto pppd[9339]: Timeout 0x8053154:0x8078560 in 30
seconds.
| Mar 27 10:32:11 pluto pppd[9339]: sent [CHAP Challenge id=0x1
| <xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>, name = "gatekeepe
| Mar 27 10:32:11 pluto pppd[9339]: Timeout 0x8056108:0x8078840 in 3
seconds.
| Mar 27 10:32:12 pluto pppd[9339]: rcvd [LCP EchoRep id=0x0 magic=0x37739c]
| Mar 27 10:32:12 pluto pppd[9339]: rcvd [CHAP Response id=0x1
| <de747eff76213c15447d825eb2c1934d0000000000000000e3bba
| Mar 27 10:32:12 pluto pppd[9339]: Untimeout 0x8056108:0x8078840.
| Mar 27 10:32:12 pluto pppd[9339]: ChapReceiveResponse: rcvd type
MS-CHAP-V2
| Mar 27 10:32:12 pluto pppd[9339]: sent [CHAP Success id=0x1
| "S=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"]
| Mar 27 10:32:12 pluto pppd[9339]: Script /etc/ppp/auth-up started (pid
9341)
| Mar 27 10:32:12 pluto pppd[9339]: sent [IPCP ConfReq id=0x1 <addr
192.168.10.1>
| <compress VJ 0f 01>]
| Mar 27 10:32:12 pluto pppd[9339]: Timeout 0x805074c:0x80787c0 in 3
seconds.
| Mar 27 10:32:12 pluto pppd[9339]: MSCHAP-v2 peer authentication succeeded
for
| <username>
| Mar 27 10:32:12 pluto pppd[9339]: Script /etc/ppp/auth-up finished (pid
9341),
| status = 0x0
| Mar 27 10:32:12 pluto pppd[9339]: rcvd [IPCP ConfReq id=0x1 <compress VJ
0f 01>
| <addr 0.0.0.0> <ms-dns1 0.0.0.0> <m
| Mar 27 10:32:12 pluto pppd[9339]: ipcp: returning Configure-NAK
| Mar 27 10:32:12 pluto pppd[9339]: sent [IPCP ConfNak id=0x1 <addr
192.168.10.1>
| <ms-dns1 192.168.10.2> <ms-wins 192.
| Mar 27 10:32:12 pluto pppd[9339]: rcvd [CCP ConfReq id=0x1 <mppe 1 0 0 71>
<lzs
| 0 1 4>]
| Mar 27 10:32:12 pluto pppd[9339]: Unsupported protocol (0x80fd) received
| Mar 27 10:32:12 pluto pppd[9339]: sent [LCP ProtRej id=0x2 80 fd 01 01 00
0f 12
| 06 01 00 00 71 11 05 00 01 04]
| Mar 27 10:32:12 pluto pppd[9339]: rcvd [IPCP ConfAck id=0x1 <addr
192.168.10.1>
| <compress VJ 0f 01>]
| Mar 27 10:32:12 pluto pppd[9339]: rcvd [IPCP ConfReq id=0x2 <compress VJ
0f 01>
| <addr 192.168.1.3> <ms-dns1 192.168
| Mar 27 10:32:12 pluto pppd[9339]: ipcp: returning Configure-ACK
| Mar 27 10:32:12 pluto pppd[9339]: sent [IPCP ConfAck id=0x2 <compress VJ
0f 01>
| <addr 192.168.1.3> <ms-dns1 192.168
| Mar 27 10:32:12 pluto pppd[9339]: Untimeout 0x805074c:0x80787c0.
| Mar 27 10:32:12 pluto pppd[9339]: ipcp: up
| Mar 27 10:32:12 pluto pppd[9339]: Cannot determine ethernet address for
proxy
| ARP
| Mar 27 10:32:12 pluto pppd[9339]: local IP address 192.168.10.1
| Mar 27 10:32:12 pluto pppd[9339]: remote IP address 192.168.1.3
| Mar 27 10:32:12 pluto pppd[9339]: Timeout 0x805a100:0x0 in 1800 seconds.
| Mar 27 10:32:12 pluto pppd[9339]: Script /etc/ppp/ip-up started (pid 9344)
| Mar 27 10:32:13 pluto pppd[9339]: rcvd [LCP TermReq id=0x2]
| Mar 27 10:32:13 pluto pppd[9339]: LCP terminated by peer
| Mar 27 10:32:13 pluto pppd[9339]: Untimeout 0x8053154:0x8078560.
| Mar 27 10:32:13 pluto pppd[9339]: Script /etc/ppp/auth-down started (pid
9400)
| Mar 27 10:32:13 pluto pppd[9339]: ipcp: down
| Mar 27 10:32:13 pluto pppd[9339]: Untimeout 0x805a100:0x0.
| Mar 27 10:32:13 pluto pppd[9339]: Timeout 0x805074c:0x8078560 in 3
seconds.
| Mar 27 10:32:13 pluto pppd[9339]: sent [LCP TermAck id=0x2]
| Mar 27 10:32:13 pluto pppd[9339]: Script /etc/ppp/auth-down finished (pid
9400),
| status = 0x0
| Mar 27 10:32:13 pluto pppd[9339]: Script /etc/ppp/ip-up finished (pid
9344),
| status = 0x0
| Mar 27 10:32:13 pluto pppd[9339]: Script /etc/ppp/ip-down started (pid
9416)
| Mar 27 10:32:13 pluto pppd[9339]: Script /etc/ppp/ip-down finished (pid
9416),
| status = 0x7f00
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Received PPTP Control Message
(type:
| 12)
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Received PPTP Control Message
(type:
| 12)
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Made a CALL DISCONNECT RPLY
packet
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Made a CALL DISCONNECT RPLY
packet
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Received CALL CLR request
(closing
| call)
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Received CALL CLR request
(closing
| call)
| Mar 27 10:32:13 pluto pptpd[76]: MGR: Reaped child 9338
| Mar 27 10:32:13 pluto pptpd[76]: MGR: Reaped child 9338
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: I wrote 148 bytes to the client.
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: I wrote 148 bytes to the client.
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Sent packet to client
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Sent packet to client
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Error with select(), quitting
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Error with select(), quitting
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Client <ISP ipaddr> control
connection
| finished
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Client <ISP ipaddr> control
connection
| finished
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Exiting now
| Mar 27 10:32:13 pluto pptpd[9338]: CTRL: Exiting now
| Mar 27 10:32:13 pluto pppd[9339]: Modem hangup
| Mar 27 10:32:13 pluto pppd[9339]: Untimeout 0x805074c:0x8078560.
| Mar 27 10:32:13 pluto pppd[9339]: Connection terminated.
| Mar 27 10:32:13 pluto pppd[9339]: Connect time 0.1 minutes.
| Mar 27 10:32:13 pluto pppd[9339]: Sent 410 bytes, received 432 bytes.
| Mar 27 10:32:13 pluto pppd[9339]: Failed to open /dev/pts/5: No such file
or
| directory
| Mar 27 10:32:13 pluto last message repeated 9 times
| Mar 27 10:32:13 pluto pppd[9339]: Exit.
|
| If there is any other information I can provide, please let me know.
|
| TIA
|
| ---------------------------------------------------------------------
| Eric H. Raskin eraskin at paslists.com
| Professional Advertising Systems Inc. Voice: 914-741-1100
| 70 Memorial Plaza Fax: 914-741-2788
| Pleasantville, NY 10570
|
|
| _______________________________________________
| pptp-server maillist - pptp-server at lists.schulte.org
| http://lists.schulte.org/mailman/listinfo/pptp-server
| List services provided by www.schulte.org!
|
More information about the pptp-server
mailing list