[pptp-server] Almost there...!

John Van Ostrand john at netdirect.ca
Tue May 23 07:05:43 CDT 2000


You need a WINS server. The WINS server provides the "browse list" (see in
Network Neighborhood) and provides the translation from name to IP address
(needed when opening a system from Network Neighborhood.) Without these you
will not be able to browse the remote Win98 systems, you can, however,
access these systems without WINS using an LMHOSTS file.

To setup a WINS server use Samba and configure /etc/smb.conf The lines you
care about are:

	workgroup = WORKGROUP
	wins support = yes

Then setup TCP/IP on your LAN based workstations to use your Linux system as
the WINS server. You can set the remote systems automatically if you have
the ms-wins option in your /etc/ppp/options file.

If you don't need browsing and just want to access the systems you can use
the LMHOSTS feature of Windows. Edit the \Windows\LMHOSTS file and create an
entry for each system you want to access. If memory serves the line would
look like this for an IP address of and a system name of ACCT		ACCT

One final note: You should consider using Samba as a file/print server for
your LAN. Samba can act like a Windows NT domain controller authenticating
your users when they boot their systems. Just add the line:

	security = user
	encrypt passwords = yes
	domain logons = yes

Then create a netlogon share. Create users using the smbpasswd program.

To setup the client, add Client for Microsoft Networks in the Network
Control panel, set it to be the default login, and set its properties to
logon to the domain you specified in smb.conf (workgroup = ). I also set the
workgroup in the network control panels identification tab.


> -----Original Message-----
> From: Mark Turner [mailto:MarkT at govirtual.com.au]
> Sent: Monday, May 22, 2000 9:43 PM
> To: pptp-server at lists.schulte.org
> Subject: [pptp-server] Almost there...!
> I've installed, configured & tested my first PPTP tunnel.
> Pinged other machines on the LAN fine!
> Real happy about this.
> I'm expecting to be able to 'see' other machines via the 
> (Win98) Network
> Browser on the remote client. Not yet.
> The fact that the Ping's are OK indicates the tunnel is fine. (Yup?).
> What else do I have to do to have Win packets visible? I'm not running
> any servers on the LAN. Just peer to peer Win networking.
> Any comments greatly appreciated.
> Packet of Tim Tams if you're in Sydney.
> Regards, Mark Turner
> _______________________________________________
> pptp-server maillist  -  pptp-server at lists.schulte.org
> http://lists.schulte.org/mailman/listinfo/pptp-server
> List services provided by www.schulte.org!

More information about the pptp-server mailing list