[pptp-server] Again connection Problems to my PPTP Server
Roland H
mrgermany at t-online.de
Tue Dec 18 09:35:46 CST 2001
what do you mean with correct one? In that subnet is the network of my
server!
i did that change in my options.pptpd file, but that didn't kook a change to
my pptpd accesability! ;-(
but there was another errormessage "couldn't replace default route to ppp0"
or something like that, but thats why i forgot the "nodefaultroute" in the
options.pptpd.
Thank you for your homepage, thats one which did realy helped me setting up
my pptpd!
Any other idea?
Bye Roland
----- Original Message -----
From: "robert" <berzerke at swbell.net>
To: "Roland H" <mrgermany at t-online.de>; <pptp-server at lists.schulte.org>
Sent: Tuesday, December 18, 2001 4:01 PM
Subject: Re: [pptp-server] Again connection Problems to my PPTP Server
> Are you sure the 192.168.0.0/24 subnet is the correct one?
>
> Also, try this options.pptpd file
>
> name *
> lock
> mtu 1490
> mru 1490
> proxyarp
> auth
> +chap
> #+chapms #This one is optional and my be omitted.
> +chapms-v2
> ipcp-accept-local
> ipcp-accept-remote
> lcp-echo-failure 3
> lcp-echo-interval 5
> deflate 0
> mppe-128
> mppe-40
> mppe-stateless
> nodeflate
> nobsdcomp
>
>
> On Tuesday 18 December 2001 07:55 am, Roland H wrote:
> > Hi all,
> >
> > thanx for your great help, but I have still that error! Now I changed
the
> > IP adresses: localip 192.168.0.50
> > remoteip 192.168.0.60-80
> > but nothing changed, still the same error!
> > What can I try now?
> >
> > Thanx, Roland
> >
> >
> >
> >
> > Roland H wrote:
> >
> > Hi all,
> > for (now) two weeks I try to set my server to allow incoming vpn
> > connection, but what have I realised? nearly nothing! Anyway, at first
> > thanx for your great help here in the mailinglist!
> > Perhaps you can help me again!
> > Please take a look at my settings and my log!
> > Dec 16 17:06:30 Server pppd[963]: remote IP address 192.168.1.234
> > Dec 16 17:07:06 Server pptpd[962]: CTRL: Received PPTP Control
Message
> > (type: 12)
> > It took 36 seconds until that message came! What does that mean?
> > Dec 16 17:07:06 Server pptpd[962]: GRE: read error: Bad file
descriptor
> > Dec 16 17:07:06 Server pptpd[962]: CTRL: PTY read or GRE write
failed
> > (pty,gre)=(-1,-1)
> > And whats that?
> > I searched the hole web, but I could find nothing!
> >
> > IMPORTANT: when I cut my dsl line (with /etc/rc.d/adsl stop) it
works,
> > but not over the internet ;-)!
> >
> > Any help would be very nice!
> >
> > bye
> > Roland
> >
> > (options.pptp:)
> >
> > debug
> > name server
> > mru 1450
> > mtu 1450
> > nodefaultroute
> > auth
> > require-chap
> > proxyarp
> > +chap
> > +chapms
> > +chapms-v2
> > mppe-40
> > mppe-128
> > mppe-stateless
> >
> > (pptpd.conf:)
> > option /etc/ppp/options.pptp
> > debug
> > localip 192.168.0.234
> > remoteip 192.168.1.234-238,192.168.1.245
> >
> > (var/log/messages)
> > Hec 16 17:06:29 Server pptpd[962]: MGR: Launching /usr/sbin/pptpctrl
to
> > handle client
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: local address =
192.168.0.234
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: remote address =
192.168.1.234
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: pppd options file =
> > /etc/ppp/options.pptp
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: Client 192.168.0.20 control
> > connectionstarted
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: Received PPTP Control
Message
> > (type: 1)
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: Made a START CTRL CONN RPLY
> > packet Dec 16 17:06:29 Server pptpd[962]: CTRL: I wrote 156 bytes to the
> > client. Dec 16 17:06:29 Server pptpd[962]: CTRL: Sent packet to client
Dec
> > 16 17:06:29 Server pptpd[962]: CTRL: Received PPTP Control Message
(type:
> > 7)
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: 0 min_bps, 1525 max_bps, 32
> > window size
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: Made a OUT CALL RPLY packet
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: Starting call (launching
pppd,
> > opening GRE)
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: pty_fd = 5
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: tty_fd = 6
> > Dec 16 17:06:29 Server pptpd[963]: CTRL (PPPD Launcher): Connection
> > speed = 115200
> > Dec 16 17:06:29 Server pptpd[963]: CTRL (PPPD Launcher): local
address
> > = 192.168.0.234
> > Dec 16 17:06:29 Server pptpd[963]: CTRL (PPPD Launcher): remote
address
> > = 192.168.1.234
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: I wrote 32 bytes to the
> > client. Dec 16 17:06:29 Server pptpd[962]: CTRL: Sent packet to client
Dec
> > 16 17:06:29 Server pptpd[962]: CTRL: Received PPTP Control Message
(type:
> > 15)
> > Dec 16 17:06:29 Server pptpd[962]: CTRL: Got a SET LINK INFO packet
> > with standard ACCMs
> > Dec 16 17:06:30 Server pppd[963]: pppd 2.4.0 started by root, uid 0
> > Dec 16 17:06:30 Server pppd[963]: Using interface ppp1
> > Dec 16 17:06:30 Server pppd[963]: found interface eth0 for proxy arp
> > Dec 16 17:06:30 Server pppd[963]: local IP address 192.168.0.234
> > Dec 16 17:06:30 Server pppd[963]: remote IP address 192.168.1.234
> > Dec 16 17:07:06 Server pptpd[962]: CTRL: Received PPTP Control
Message
> > (type: 12)
> > Dec 16 17:07:06 Server pptpd[962]: CTRL: Made a CALL DISCONNECT RPLY
> > packet Dec 16 17:07:06 Server pptpd[962]: CTRL: Received CALL CLR
request
> > (closing call)
> > Dec 16 17:07:06 Server pptpd[962]: CTRL: I wrote 148 bytes to the
> > client. Dec 16 17:07:06 Server pptpd[962]: CTRL: Sent packet to client
Dec
> > 16 17:07:06 Server pptpd[962]: GRE: read error: Bad file descriptor Dec
16
> > 17:07:06 Server pptpd[962]: CTRL: PTY read or GRE write failed
> > (pty,gre)=(-1,-1)
> > Dec 16 17:07:06 Server pptpd[962]: CTRL: Client 192.168.0.20 control
> > connectionfinished
> > Dec 16 17:07:06 Server pptpd[962]: CTRL: Exiting now
> > Dec 16 17:07:06 Server pptpd[775]: MGR: Reaped child 962
> >
> > _______________________________________________
> > pptp-server maillist - pptp-server at lists.schulte.org
> > http://lists.schulte.org/mailman/listinfo/pptp-server
> > --- To unsubscribe, go to the url just above this line. --
More information about the pptp-server
mailing list