[pptp-server] Net2Net

[Clint Fast]

The original poster also mentioned that he was connecting this to a
Netpoia 9100, which only supports PPTP and IPSec (but not 3DES, only
DES, and IKE).  So, VTun is not a solution.


Jordan Share wrote:
> 
> But IPSec is a standard.  And the experience you get setting it up is way more transferable to other VPN setups that you might encounter in your career.
> 
> IPSec also provides a solid foundation for future expansion.  You know that your setup will work with other systems (like win2k, or Netscreen firewalls, etc.)  You can grow incrementally, without having to redesign from scratch.
> 
> Of course, if you just want it to work (and have no plans for future changes), Vtun may be just the ticket.
> 
> Jordan
> 
> -----Original Message-----
> From: pptp-server-admin at lists.schulte.org
> [mailto:pptp-server-admin at lists.schulte.org]On Behalf Of Michael
> McConnell
> Sent: Wednesday, November 21, 2001 6:23 PM
> To: HVR; Eric Prégnon
> Cc: pptp-server at lists.schulte.org
> Subject: Re: [pptp-server] Net2Net
> 
> I'd recommend Vtun, it's far easier than IPSec
> http://vtun.sourceforge.net/
> 
> ----- Original Message -----
> From: "HVR" <hvrietsc at yahoo.com>
> To: "Eric Prégnon" <epregnon at titus.fr>
> Cc: <pptp-server at lists.schulte.org>
> Sent: Wednesday, November 21, 2001 4:09 PM
> Subject: Re: [pptp-server] Net2Net
> 
> > may i suggest FreeS/wan for this. an ipsec solution is much better for
> > this situation http://www.freeswan.org
> >
> >
> > Eric Prégnon wrote:
> >
> > >
> > >I Want to link two networks (Office and a subsediary). My problem is that
> i
> > >can work only in one direction and not on both sides.
> > >My config is :
> > >- Network A (Office) : private IP addresses, an Astaro server with 2 NICs
> > >(One with private address, one with a public address, a cisco router.
> > >- Network B (Subsediary) : private address, a Netopia R9100 router, a DSL
> > >line.
> > >
> > >- I have put the proxyarp in pptp.conf
> > >- I have added a static route in the Netopia to access the internal
> network
> > >A
> > >- I have added a static route in the Astaro server to access the internal
> > >network B
> > >
> > >When I launch the connection, in the VPN debug log, I have :  Cannot
> > >determine ethernet address for proxy ARP
> > >
> > >>From network B, I can ping every address of Network A
> > >>From Network A, I cannot ping any address in network B
> > >
> > >Can you help me ?
> > >Thanks.
> > >
> > >
> > >-------------------------------------------
> > > Eric Prégnon
> > > Network Administrator
> > > Tel:33 1 60 31 57 71/Fax:33 1 60 31 07 08
> > > e-mail : epregnon at titus.fr
> > >
> > >
> > >
> > >_______________________________________________
> > >pptp-server maillist  -  pptp-server at lists.schulte.org
> > >http://lists.schulte.org/mailman/listinfo/pptp-server
> > >--- To unsubscribe, go to the url just above this line. --
> > >
> >
> >
> > _______________________________________________
> > pptp-server maillist  -  pptp-server at lists.schulte.org
> > http://lists.schulte.org/mailman/listinfo/pptp-server
> > --- To unsubscribe, go to the url just above this line. --
> >
> 
> _______________________________________________
> pptp-server maillist  -  pptp-server at lists.schulte.org
> http://lists.schulte.org/mailman/listinfo/pptp-server
> --- To unsubscribe, go to the url just above this line. --
> 
> _______________________________________________
> pptp-server maillist  -  pptp-server at lists.schulte.org
> http://lists.schulte.org/mailman/listinfo/pptp-server
> --- To unsubscribe, go to the url just above this line. --