[pptp-server] MPPE 128 Bit Compression?? What happen to Encryption???

[Jerry Vonau]

George:

What type of client is connecting?
I saw that "receive", messing with 
the linux client. Can't recall
what the cause was, but I fiddled
with the options till it didn't have
the "receive" in there.....


Jerry Vonau



George Vieira wrote:
> 
> Hey People,
> 
> I finally got my new kernel (old now after so long trying to get it working)
> to compile and boot with MPPE built in.
> My problem is that I still get it coming up as MPPE 128 bit Compression and
> not Encryption...
> 
> Why is this happening, what have I configured wrongly?
> 
> Jan 15 07:57:59 firewall pppd[1468]: pppd 2.4.1 started by root, uid 0
> Jan 15 07:57:59 firewall pppd[1468]: Using interface ppp0
> Jan 15 07:57:59 firewall pppd[1468]: Connect: ppp0 <--> /dev/pts/1
> Jan 15 07:58:02 firewall pppd[1468]: MSCHAP-v2 peer authentication succeeded
> for georgev
> Jan 15 07:58:02 firewall pppd[1468]: found interface eth0 for proxy arp
> Jan 15 07:58:02 firewall pppd[1468]: local  IP address 10.10.0.254
> Jan 15 07:58:02 firewall pppd[1468]: remote IP address 10.10.0.97
> Jan 15 07:58:02 firewall pppd[1468]: MPPE 128 bit, stateless receive
> compression enabled
> 
> thanks,
> George Vieira
> Systems Manager
> Citadel Computer Systems P/L
> http://www.citadelcomputer.com.au
> 
> _______________________________________________
> pptp-server maillist  -  pptp-server at lists.schulte.org
> http://lists.schulte.org/mailman/listinfo/pptp-server
> --- To unsubscribe, go to the url just above this line. --