[pptp-server] mppe_stateless.patch failure on ppp-2.2.10

[R. Joseph Villa., II]

I'm not familiar enough with how the patching process works to figure out
how to do it like you did. If you have come up with a patch file that works.
I'd love to check it out.

Thanks for your help.
Joe

-----Original Message-----
From: Philip L. Butler [mailto:butler at dii.net]
Sent: Wednesday, December 08, 1999 11:25 AM
To: joe at dietcraze.com
Subject: Re: [pptp-server] mppe_stateless.patch failure on ppp-2.2.10


I had the same problem.  The patch file looked OK, but it didn't seem to
work.

What I did was to manually patch the files based on the patch file.
There were only 2 simple edits to make.  After that, I created my own
patch files (using diff -U3... if I recall) and used those within my
master install script.  I didn't combine them into a single patch
file but I just (from within my master install script) patch the 2
files that the other patch file should have processed.

Hope this helps.

Phil Butler
butler at dii.net

>I am having trouble applying the ppp-2.2.10 mppe_stateless.diff patch
>referenced in the link below. I get 2 failed hunks when I apply it
according
>to the instructions. I have installed from the tarball into /usr/local/src.
>I have successfully applied the ppp-2.3.10-openssl-norc4-mppe.patch with no
>trouble. I am not sure where the problem is.
>
>Here is the output of the command:
>
>patch -p0 -b < mppe_stateless.diff
>
>  >>>
>patching file linux/ppp_mppe.c
>Hunk #1 FAILED at 163.
>Hunk #2 FAILED at 1051.
>2 out of 2 hunks FAILED -- saving rejects to file linux/ppp_mppe.c.rej
>  >>>>
>
>Original instructions found in:
>http://lists.schulte.org/pipermail/pptp-server/1999-November/001085.html
>
>
>R. Joseph Villa, II
>joe at dietcraze.com
>
>http://www.dietcraze.com
>
>
>
>_______________________________________________
>pptp-server maillist  -  pptp-server at lists.schulte.org
>http://lists.schulte.org/mailman/listinfo/pptp-server
>List services provided by www.schulte.org!