[pptp-server] PPP 2.3.10
jean-Paul Chavant
chavant at geosys.fr
Tue Nov 23 09:24:15 CST 1999
Hello,
on linux box with 2.2.13 kernel
i patch suuccesfull
i compile my kernel (because it doens t haveloadable module activated)
and i made these commands :
[root at vpn distant]# cd /usr/src/linux
[root at vpn linux]# rmmod ppp
[root at vpn linux]# insmod slhc
/lib/modules/2.2.13-7mdk/net/slhc.o: a module named slhc already exists
[root at vpn linux]# insmod ppp
[root at vpn linux]# insmod bsd comp
insmod: bsd: no module by that name found
[root at vpn linux]# insmod ppp deflate
here nothing else ... system is blocked ...
someone can help me ?
thanks.
Jean-Paul Chavant
_-----_ GEOSYS SA - Service Informatique
(_/ \_) Tél.: (0) 5 62 47 80 75
(_____) \/\/\___ http://www.geosys.fr/
> -----Original Message-----
> From: pptp-server-admin at lists.schulte.org
> [mailto:pptp-server-admin at lists.schulte.org]On Behalf Of Toktar, Emir
> Sent: mercredi 3 novembre 1999 21:49
> To: 'Matthew C. Grab'; pptp-server at lists.schulte.org
> Subject: RE: [pptp-server] PPP 2.3.10
>
>
> When I installed the PoPToP, I follow the procedures HowTo/Faq and had any
> problems.
>
> I modifyed any procedures below and work fine.
>
> Procedures that I used for comments.
> (+) lines that I add ....
> (-) lines that I cut .... # not necessary
> # comment
> ******************************
> PoPToP HOWTO/FAQ
> ----------------
> Last Updated: 19990813
> Maintained by: Matthew Ramsay <matthewr at moreton.com.au>
> HOWTO/FAQ mostly compiled from PoPToP help pages and the PoPToP
> Mailing List
> (hosted by Christopher Schulte) by Matthew Ramsay. Large
> contributions from
> Steve Rhodes and Michael Walter.
> +++++++++++++++++++++
> 3.0 PPP (and MSCHAP/MPPE) Installation
> --------------------------------------
> It is only necessary to use PPP 2.3.8 if you want Microsoft compatible
> MSCHAPv2/MPPE authentication and encryption. The reason for this is that
> the MSCHAPv2/MPPE patch currently supplied (19990813) is against
> PPP 2.3.8.
> If you don't need Microsoft compatible authentication/encryption any 2.3.x
> PPP source will be fine.
> Assuming you want Microsoft compatible authentication/encryption follow
> these steps:
> Note: [] are example commands to run
> 1. Grab yourself a clean copy of the PPP deamon v2.3.8 (ppp-2.3.8.tar.gz).
> I usually go here for my PPP files:
> ftp://cs.anu.edu.au/pub/software/ppp/
> Note: You must get the tarball (tar.gz) and *not* the RPM.
> 2. Grab youself the MSCHAP/MPPE diff file from:
>
> http://www.moretonbay.com/vpn/releases/ppp-2.3.8-mppe-others-norc4
> _TH7.diff.
> gz
> 3. Grab yourself the SSLeay-0.6.6b file from:
> ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL/SSLeay-0.6.6b.tar.gz
> 4. You should now have 3 files:
> ppp-2.3.8.tar.gz
> ppp-2.3.8-mppe-others-norc4_TH7.diff.gz
> SSLeay-0.6.6b.tar.gz
> (+) ppp-2.3.8-patch1 ==>correction for IPX/SPX
> Copy these files to your preferred location (I prefer /usr/local/src/)
> #e.g. I uninstall previus ppp
> (+) rpm -e ppp-2.3.7-2
> 5. Assuming your files are in /usr/local/src/ and your current working
> directory is also /usr/local/src/ do the following:
> [tar zxvf ppp-2.3.8.tar.gz]
> [gunzip ppp-2.3.8-mppe-others-norc4_TH7.diff.gz]
> # e.g.. it's not gunzip... [gunzip
> ppp-2.3.8-mppe-others-norc4_TH7.diff.gz]
> [tar zxvf SSLeay-0.6.6b.tar.gz]
> [cp SSLeay-0.6.6b/crypto/rc4/rc4.h ppp-2.3.8/linux/]
> [cp SSLeay-0.6.6b/crypto/rc4/rc4_enc.c ppp-2.3.8/linux/]
> (+) [cp SSLeay-0.6.6b/crypto/rc4/rc4.h /usr/src/linux/drivers/net/]
> (+) [cp SSLeay-0.6.6b/crypto/rc4/rc4_enc.c
> /usr/src/linux/drivers/net/]
> (+) [cp ppp-2.3.8-patch1 ppp-2.3.8/pppd]
> (+) [cd ppp-2.3.8/pppd]
> (+) [patch -p0 < ppp-2.3.8-patch1]
> (+) [cd /usr/local/src/]
> [patch -p0 < ppp-2.3.8-mppe-others-norc4_TH7.diff]
> [cd ppp-2.3.8]
>
> 6. The files should now all be in place and we are ready to compile PPP.
> Follow these steps to compile it:
> [./configure]
> (+) [make kernel] --> reference ppp-2.3.8
> #e.g. It isen't necessary following lines below described in
> HOWTOFAQ...
> (-) [cd linux] # not necessary
> (-) [./kinstall.sh] # not necessary
> (-) [cd ..] # not necessary
>
>
> ##
> ## Read documentation in ppp-2.3.8 ###
> ## README.linux
> ##-----(if kernel < 2.2.8)---------###
> # e.g. Build the kernel when < Kernel 2.2.8
> # kernel
> [cd /usr/src/linux/]
> [make menuconfig .....if necessary ...]
> [make dep]
> [make clean]
> [make bzImage]
> [make modules]
> [make modules_install]
> ###-----(endif kernel < 2.2.8)---------###
> [pwd]
> [usr/local/src/ppp-2.3.8] # be sure into ppp-2.3.8 dir
> [make]
> [cp pppd/pppd /usr/sbin/]
> (+) [make install] --> reference ppp-2.3.8
> [cd /usr/src/linux]
> [make modules SUBDIRS=drivers/net]
> [make modules_install]
> [rmmod ppp]
> (+) [insmod slhc]
> (+) [insmod ppp]
> (+) [insmod bsd_comp]
> (+) [insmod ppp_deflate]
> (+) [insmod ppp_mppe]
>
>
>
> Emir Toktar
> +55 ** 41 340-7157
> emir.toktar at bra.xerox.com
> toktar at per.com.br
> toktar at ppgia.pucpr.br
>
>
> -----Original Message-----
> From: Matthew C. Grab [mailto:mis at cindyrowe.com]
> Sent: Wednesday, November 03, 1999 1:08 PM
> To: pptp-server at lists.schulte.org
> Subject: [pptp-server] PPP 2.3.10
>
>
> Hi, I have been following the PopTop Howto. In the PPP compile /install
> part, I am supposed to type "make modules SUBDIRS=drivers/net"
> while in the
> /usr/src/linux directory. I am getting this error message. Can anybody
> help point me in the right direction? I'm running RedHat 6.0, and I don't
> know much about compiling kernels or modules or where in linux source for
> anything is kept/installed. I would greatly appreciate any help you could
> offer. I started with PPP 2.3.8 and the mppe patch, but I couldn't get
> anywhere, so I moved to PPP 2.3.10 with the mppe patch.
>
> Thanks in advance,
> Matt Grab
> mis at cindyrowe.com
>
>
> [root at shop7 linux]# make modules SUBDIRS=drivers/net
> make -C drivers/net CFLAGS="-Wall -Wstrict-prototypes -O2
> -fomit-frame-pointer
> -pipe -fno-strength-reduce -m486 -malign-loops=2 -malign-jumps=2
> -malign-functio
> ns=2 -DCPU=586 -DMODULE -DMODVERSIONS -include
> /usr/src/linux-2.2.5/include/linu
> x/modversions.h" MAKING_MODULES=1 modules
> make[1]: Entering directory `/usr/src/linux-2.2.5/drivers/net'
> make[1]: *** No rule to make target
> `/usr/src/linux-2.2.5/include/linux/module.h
> ', needed by `ppp.o'. Stop.
> make[1]: Leaving directory `/usr/src/linux-2.2.5/drivers/net'
> make: *** [_mod_drivers/net] Error 2
> [root at shop7 linux]#
>
> _______________________________________________
> pptp-server maillist - pptp-server at lists.schulte.org
> http://lists.schulte.org/mailman/listinfo/pptp-server
> List services provided by www.schulte.org!
>
More information about the pptp-server
mailing list