[pptp-server] Newbie question: routing problem?

Joe Polcari Joe at Polcari.com
Mon Dec 10 20:42:01 CST 2001




I connect through an SMC Barricade, no pptpd just win2k direct
using the built in MS VPN, and it's just like sitting on the corporate
LAN.
I believe it only NATs IP, not GRE.

Joe

George Vieira wrote:

> We really need to have a peep at your logs for pppd. I don't think
> your SMC firewall is passing/NATing GRE through is it? I don't even
> think this will work as I've seen talks about NATing which doesn't
> work for pptpd..Have you tried connecting to your server within the
> LAN (locally).. if this works then your setup/options are fine but the
> outside conection is the problem. My bet it's the SMC firewall..Don't
> forget to pass protocol 47.
>
> thanks,
> George Vieira
> Systems Manager
> Citadel Computer Systems P/L
> -----Original Message-----
> From: Jimmy Henson [mailto:jhenson at connecterra.com]
> Sent: Tuesday, 11 December 2001 5:15 AM
> To: pptp-server at lists.schulte.org
> Subject: [pptp-server] Newbie question: routing problem?
>
> Hi folks, I've been able to get my Linux pptpd server up and running,
> thanks to the fine HOWTO document prepared by Mr. Spotswood.  But I
> have a strange problem, and my logs aren't providing any helpful
> clues. My pptpd server is running behind a SMC Barricade firewall, and
> I've opened port 1723 to the server.  The firewall performs NATting,
> of course, and the pptpd server sits on the LAN.  With a Windows
> client (Win 2K and Win ME tested) on the WAN, I can connect to the
> pptpd server with no problem.  However, after I connect, I can't ping
> *anything* on the VPN -- not even the pptpd server to which I'm
> connected!  The pptpd server isn't running a firewall (e.g.
> netfilter/iptables), and from the pptpd server console, I can see
> (ping) the rest of my LAN. As for the cause of my problem, I've
> considered several possibilities:* GRE.  Is my firewall incapable of
> passing GRE?* Mis-configured kernel.  I recompiled my kernel in order
> to get pptpd to work -- could I have left out an important module?*
> Routing.  My pptpd server is running on a single NIC box.  Do I still
> need to worry about routing (e.g. do I need to run "routed" and/or
> enable ipv4 packet forwarding?) I'm stumped.  Am I overlooking
> something incredibly basic??Thanks for reading,Jimmy


More information about the pptp-server mailing list