[pptp-server] Allowing to access the lan.

[Dmitri Gofmekler]

Allan,

> > ... all lan1 and
> > lan2 resources ...
>
> What *are* those resources?  ftp, http, smtp, pop, imap, ssh, shttp all

I mean all TCP/IP traffic. I can't get it works, all connections a seems to
go thru usual WAN, I mean default gateway.


----- Original Message -----
From: "Allan Clark" <allanc at caldera.com>
To: "Dmitri Gofmekler" <dmitri at arvid.ee>
Cc: <pptp-server at lists.schulte.org>
Sent: Friday, September 14, 2001 8:07 PM
Subject: Re: [pptp-server] Allowing to access the lan.


> Dmitri;
>
> I think we've had problems in the past dealing with MSNetworking over a
> PPTP connection.  I think it has to do with MSNewtworking defaulting to
> broadcasting for all resources... unless that was restricted to NetBEUI.
>
> In addressing what you want to work
>
> > ... all lan1 and
> > lan2 resources ...
>
> What *are* those resources?  ftp, http, smtp, pop, imap, ssh, shttp all
> seem to work just fine.  If you're having problems with WIndows name
> resolution, you might want to configure your PPTP clients to use DNS for
> resolution as a fallback; then, if a host isn't found (ie if
> \\PRINTER\laser4 refers to lrp laser4 at printer.lineo.com) "PRINTER" might
> be resolved as "printer.lineo.com" and enable you to see/use its
> resources.
>
> Does that address the services you're looking for?  It's difficult to
> answer the question when we're assuming what services you need.
>
> Allan
> (pptp lurker)
>
>
> Dmitri Gofmekler wrote:
> >
> > Hello all,
> >
> > Probably you can help :)
> >
> > Situation:
> >
> > Server, that running pptpd (poptop.lineo.com), address is 212.7.8.250
(this
> > server does not plays any routing or masquerading role).
> >
> > 2 local networks: Lan1 - 212.7.8.224/27 & Lan2 - 212.7.8.192/27, lan1
> > router - 212.7.8.225, lan2->lan1 router 212.7.8.222, lan 2 def. route -
> > 212.7.8.193. Lan 1 connected to internet thru lan2.
> >
> > -- cut from /etc/pptpd.conf --
> > remote ip 212.7.8.251-253
> > local ip 212.7.8.242-244
> > Client, Windows NT 4.0.
> > -- end of cut --
> >
> > Question:
> > What exactly I have to do to get PPTP client ability to use all lan1 and
> > lan2 resources, includes MS Network over TCP/IP and also to allow client
to
> > go to the Internet thri it's vpn connection? Can someone give me
explained
> > configuration?
> >
> > Thanks in advance,
> > Dmitri.
> >
> > _______________________________________________
> > pptp-server maillist  -  pptp-server at lists.schulte.org
> > http://lists.schulte.org/mailman/listinfo/pptp-server
> > --- To unsubscribe, go to the url just above this line. --
>
>