[pptp-server] New PoPToP - GRE: PTY Read failed.

Eric H. Raskin eraskin at paslists.com
Fri Feb 18 07:16:39 CST 2000


Pat:

 I've gotten *much* farther along.  I switched to using pptpd (instead of
pptpctrl in inetd.conf).  I now get pppd connecting successfully.  Then, the
following shows up in my ppp.log file:

Feb 19 08:03:17 pluto pppd[11932]: rcvd [IPCP ConfAck id=0x1 <addr 0.0.0.0>
<compress VJ 0f 01>]
Feb 19 08:03:17 pluto pppd[11932]: rcvd [IPCP ConfReq id=0x2 <compress VJ 0f 01>
<addr 0.0.0.0>]
Feb 19 08:03:17 pluto pppd[11932]: ipcp: returning Configure-NAK
Feb 19 08:03:17 pluto pppd[11932]: sent [IPCP ConfNak id=0x2 <addr
192.168.1.235>]
Feb 19 08:03:17 pluto pppd[11932]: rcvd [IPCP ConfReq id=0x3 <compress VJ 0f 01>
<addr 192.168.1.235>]
Feb 19 08:03:17 pluto pppd[11932]: ipcp: returning Configure-ACK
Feb 19 08:03:17 pluto pppd[11932]: sent [IPCP ConfAck id=0x3 <compress VJ 0f 01>
<addr 192.168.1.235>]
Feb 19 08:03:17 pluto pppd[11932]: Untimeout 0x805074c:0x80787c0.
Feb 19 08:03:17 pluto pppd[11932]: ipcp: up
Feb 19 08:03:17 pluto pppd[11932]: Could not determine local IP address
Feb 19 08:03:17 pluto pppd[11932]: ipcp: down
Feb 19 08:03:17 pluto pppd[11932]: sent [IPCP TermReq id=0x2 "Could not
determine local IP address"]
Feb 19 08:03:17 pluto pppd[11932]: Timeout 0x805074c:0x80787c0 in 3 seconds.
Feb 19 08:03:20 pluto pppd[11932]: sent [IPCP TermReq id=0x3 "Could not
determine local IP address"]
Feb 19 08:03:20 pluto pppd[11932]: Timeout 0x805074c:0x80787c0 in 3 seconds.

Here's my pptpd.conf file:

speed 115200
localip 192.168.0.234-238,192.168.0.245
remoteip 192.168.1.234-238,192.168.1.245

That's it.

Here's the command line I used to start pptpd:

# /usr/sbin/pptpd -f -o /etc/ppp/options.pptp -d -s 115200

What am I missing now?

TIA

  Eric Raskin

> -----Original Message-----
> From: pptp-server-admin at lists.schulte.org
> [mailto:pptp-server-admin at lists.schulte.org]On Behalf Of Patrick J.
> LoPresti
> Sent: Thursday, February 17, 2000 4:20 PM
> To: eraskin at paslists.com.paslists.com
> Cc: pptp-server at lists.schulte.org
> Subject: Re: [pptp-server] New PoPToP - GRE: PTY Read failed.
>
>
> It is very likely that your pppd is dying.
>
> The log you sent did not include any output from pppd, but you
> specified "debug" in your /etc/ppp/options file.  That means somehow
> you failed to capture the logs from pppd.
>
> Check your syslog.conf to ensure you are capturing daemon.* and
> local2.*.  (Some pppd's are configured to log to the latter for some
> reason.)  Or just capture everything and grep for pppd.  If you cannot
> figure it out from that, send the log and we will see what we can
> do...
>
>  - Pat
>
> _______________________________________________
> pptp-server maillist  -  pptp-server at lists.schulte.org
> http://lists.schulte.org/mailman/listinfo/pptp-server
> List services provided by www.schulte.org!





More information about the pptp-server mailing list