[pptp-server] speed

[joe ditto]

i'm a little daft as to logs, which one's would you like to see as to my pptpd.conf file, here you go:


################################################################################
#
# Sample PoPToP configuration file
#
# for PoPToP version 1.0.0
#
################################################################################

# TAG: speed
#
#     Specifies the speed for the PPP daemon to talk at.
#     Some PPP daemons will ignore this value.
#
#speed 921600
#115200

# TAG: option
#
#     Specifies the location of the PPP options file.
#     By default PPP looks in '/etc/ppp/options'
#
#option /this/is/the/options/file

# TAG: debug
#
#     Turns on (more) debugging to syslog.
#
debug

# TAG: localip
# TAG: remoteip
#
#     Specifies the local and remote IP address ranges.
#
#     You can specify single IP addresses seperated by commas or you can
#     specify ranges, or both. For example:
#
#           192.168.0.234,192.168.0.245-249,192.168.0.254
#
#     IMPORTANT RESTRICTIONS:
#
#     1. No spaces are permitted between commas or within addresses.
#
#     2. If you give more IP addresses than MAX_CONNECTIONS, it will
#        start at the beginning of the list and go until it gets 
#        MAX_CONNECTIONS IPs. Others will be ignored.
#
#     3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
#        you must type 234-238 if you mean this.
#
#     4. If you give a single localIP, that's ok - all local IPs will
#        be set to the given one. You MUST still give at least one remote
#        IP for each simultaneous client.
#
localip 192.168.0.20
#1-190
remoteip 192.168.0.199
#191-200

# TAG: ipxnets
#
#     This gives the range of IPX networks to allocate to clients.  By
#     default IPX network number allocation is not handled internally.
#     By putting a low and high network number here a pool of IPX networks
#     can be defined.  If this is done then there must be one IPX network
#     per client.
#
#     The format is a pair of hex numbers without any 0x prefix separated
#     by a hyphen.
#
#ipxnets 00001000-00001FFF

# TAG: listen
#
#     Defines the IP address of the local interface on which pptpd
#     should listen for connections.  The default is to listen on all
#     local interfaces (even ones brought up by pptp connections, thus
#     permitting pptp tunnels inside the pptp tunnels).
#
#listen 192.168.0.1

# TAG: pidfile
#
#     This defines the file name in which pptpd should store its process
#     ID (or pid).  The default is /var/run/pptpd.pid.
#
#pidfile /var/run/pptpd.pid
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.schulte.org/mailman/private/pptp-server/attachments/20011209/081ac513/attachment.html>