RESOLVED: RE: [pptp-server] Server may ping client, client unable to ping s erver

[Tom Canich]

The problem:  Client can connect, but cannot send any traffic to the
Network, Server can ping client,

Solution:  The RemoteIP and LocalIP tags were both set to the same range
and the same address was being used for both.  By changing localip to
10.0.0.4-5 and RemoteIP to 10.0.0.6-7 the client was able to connect and
send ping traffic to the Lan.

Thanks to all who replied!

tom


> I always configure the ppp interface (local) to have the same address as the
> ethernet interface of the PPTP server (not a range). Although its not a
> requirement to be successful. Also, the remote address range should be
> configured to have an unused IP range within the same network address of the
> LAN if the proxyarp function is going to be successful in determining which
> interface will answer arp requests on behalf of the PPTP client.