[pptp-server] Pptp working only without encryption.

[robert]

What does you modules.conf look like?  A correct one is in the howto.

On Sunday 06 May 2001 17:00, Stijn Jonker wrote:
> On Sun, 6 May 2001, robert wrote:
>
>
> Thanks for the reply,
>
> I copied and pasted those options, and no success, still the links goes up
> ok, but no traffic. Is there anything I can do like give an option to the
> mppe modules to force debugging or such?
>
> > W2K clients are really picky about the option file you use.  Try the
> > option file in the 2.4 kernel howto at http://home.swbell.net/berzerke
> >
> > On Sunday 06 May 2001 06:49, Stijn Jonker wrote:
> > > Hello,
> > >
> > > I got pptp working like a charm as long as i don't enable encryption.
> > >
> > > I'm running kernel 2.4.3 and pppd 2.4.0 with the mppe patches.
> > > ppp_mppe.o modules loads fine, my w2k laptop can connect over the lan
> > > and over dialup. Authentication works fine and such, but when i enable
> > > encryption i can't even ping the remote ip from the tunnel. Without
> > > encryption it all works without any problems.
> > >
> > > In encryption mode the log reports ms-chapv2 & mppe 128. And no error
> > > msg's.
> > >
> > > Any suggestions anybody.