[pptp-server] Pptp working only without encryption.

Dave Henderson dhenders at itdepartment.com
Mon May 7 07:35:17 CDT 2001


I've been messing with this stuff last week, and I've found that the option
file in that howto doesn't work...  however, once I removed the mppe-40
option, the encrypted connection started working like a charm...

-----Original Message-----
From: robert [mailto:berzerke at swbell.net]
Sent: May 6, 2001 14:51
To: Stijn Jonker; pptp-server at lists.schulte.org
Subject: Re: [pptp-server] Pptp working only without encryption.


W2K clients are really picky about the option file you use.  Try the option 
file in the 2.4 kernel howto at http://home.swbell.net/berzerke

On Sunday 06 May 2001 06:49, Stijn Jonker wrote:
> Hello,
>
> I got pptp working like a charm as long as i don't enable encryption.
>
> I'm running kernel 2.4.3 and pppd 2.4.0 with the mppe patches. ppp_mppe.o
> modules loads fine, my w2k laptop can connect over the lan and over
> dialup. Authentication works fine and such, but when i enable encryption i
> can't even ping the remote ip from the tunnel. Without encryption it all
> works without any problems.
>
> In encryption mode the log reports ms-chapv2 & mppe 128. And no error
> msg's.
>
> Any suggestions anybody.
_______________________________________________
pptp-server maillist  -  pptp-server at lists.schulte.org
http://lists.schulte.org/mailman/listinfo/pptp-server
List services provided by www.schulteconsulting.com!



More information about the pptp-server mailing list